[DeTomaso] Muffler Options
Pantdino
pantdino at aol.com
Sun Aug 1 17:54:51 EDT 2010
So there is no baffling or sound deadening at all?
Aren't they crazy loud?
Jim
-----Original Message-----
From: bill gaino <gaino at earthlink.net>
To: Tom Borcich <tborcich at msn.com>; Pantera Brent Stewart <bjbstewart at yahoo.com>; Pantera REALBIG forum <detomaso at realbig.com>
Sent: Sun, Aug 1, 2010 12:48 pm
Subject: Re: [DeTomaso] Muffler Options
ere is a 20$ ebay muffler 2.5 inlet, dual outlet SS gutted, I did shorten them
little too. Hollow and free flow. They look like the muffs PI sells for 199$
ttp://tinyurl.com/22owy85
----Original Message-----
From: Tom Borcich <tborcich at msn.com>
Sent: Aug 1, 2010 1:37 PM
To: Pantera Brent Stewart <bjbstewart at yahoo.com>, Pantera REALBIG forum
detomaso at realbig.com>
Subject: [DeTomaso] Muffler Options
Brent,
After reading the comments from Dan Jones about mufflers giving up 50hp due to
low restrictions I started looking at 2.5" & 3.0" inlet
mufflers from MagnaFlow. They make 2.5" and 3" inlet with dual 2.5" outlets
ith bodies that should to fit where the mufflers go on Pantera. The body
of the muffler is 8-9" wide, oval about 5 " thick and 14" long. They should
low plenty for your stroked motor, especially if you go with the 3" inlet.
Below is a link to one of 3" inlet version as an example. I saw a MagnaFlow
hat was slightly different but can't find the link...I'll look a bit more and
send it to you if I find it. I've see these mufflers in stainless for under
50-60 per muffler...once you add the tips and some labor you for snaking the
tubes from the headers back to the mufflers, you should still be at a pretty
easonable cost if you went with the 3"...check the vendor that is making
the new trunk liner(Curt?), I read he has the 3" tubing pre-made...I recall
is first name is Curt?
MagnaFlow muffler with 3" inlet and dual 2.5" outlets
http://www.fasterthanthem.com/product.php?productid=108
I know it is tricky getting a 3" tube to route through the suspension/half
haft space. But that would seem to give you the best flow possible. Then to get
he Pantera look
just have a set of angled chrome tips welded on. I found some nice large
iameter tips on ebay from a manufacturer that should look very nice, they were
about $40 for a set of four and are very good quality.
Best Regards,
Tom
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
f you want it SLICK.. bring it to SLICKUM Paint Shop www.slickpaint.com
______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
eTomaso at list.realbig.com
ttp://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list