[DeTomaso] cleveland pushrod-guideplates
JDeRyke at aol.com
JDeRyke at aol.com
Tue Apr 27 13:43:27 EDT 2010
In a message dated 4/26/10 4:52:08 PM, davel at emspace.com writes:
> Looks like I'll have to bore those, unless somebody knows a part that
> already fits the right stud???
>
Ford Racing sells the correct ones as well as the oversized ones for racing
and their prices are competitive. Their 2010 catalogue is on the web. They
also sell studs that don't break, but a stud girdle is still a good idea if
you intend to rev above 5500. My girdle is from Ridgeway and fits under cast
rocker covers while others may not. All stud girdles supply their own
locking nuts so other mfgrs locking nuts usually won't fit their girdles. Sinple
boring other guide plates won't work because they're hardened steel- you'll
need a Dremel, a dozen stones and lots of patience. Do NOT do this on the
engine or you'll never get the grindings out. Good luck- J DeRyke
More information about the DeTomaso
mailing list