[DeTomaso] Partnumbers for Fontana Clevor/C302B - need help

[Will Kooiman]

Oil pan is standard Cleveland, if I recall correctly.

For the intake, I use Fel-Pro 1229 (A3 heads).  C302B calls for 1265.  The
port sizes of 1229 are the same as C302B.  I'm not sure why 1265 would be
special.

For the exhaust, I use Fel-Pro 1417 (A3 heads).  C302B calls for 1431.  The
port sizes are very similar.  1417 would probably be fine for C302B ports.

For the heads, I use Fel-Pro 1013, but it's on a 351C block.  You should be
fine using 351C head gaskets, but you want to get a confirmation from
someone that runs a Fontana.

The last time I did my oil pan, I used the rubber end seals, plus black
silicone instead of cork.  It sealed very well.

Several people swear by RTV for headers.  I haven't tried it, but it
apparently works.

-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of Jørn C. Olsen
Sent: Friday, April 23, 2010 1:33 PM
To: detomaso at realbig.com
Subject: [DeTomaso] Partnumbers for Fontana Clevor/C302B - need help

Hope Dan/Jack or someone else of you living parts catalogs can help me!

Have lost some of my documents/mails when my old laptop died.

 

Anyone who knows the partnumbers to use:

-          Exhaust gasket

-          Head gasket

-          Intake gasket

-          Oil pan gasket

 

J.C.

_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso