[DeTomaso] Painting Question???

[Rob Dumoulin]

Once you get most the rust off, paint it with naval jelly. It will
convert the rust to metal.

On 4/18/10, Tom Borcich <tborcich at msn.com> wrote:
>
> I am bead blasting my A-arms and notice that once you get through the black
> factory paint there is a brown coating which is either fine rust or brown
> primer?
>
> The metal is cleaning up pretty well, but there are some areas where there
> are poors in the metal too small to remove all the rust so there appears to
> be a very light film of rust still present. I considering using and etching
>
>
> Best Regards,
>
> Tom Borcich
>
>
> Please visit www.BixbyKnollsMortgage.com
> The finest compliment I can ever receive is a referral to your family,
> friends and colleagues.
>
> Bixby Knolls Mortgage Corporation
> Serving with Integrity Since 1989
> 3801 Atlantic Avenue Long Beach, CA 90807-3505
> Phone: (562) 427-2222 ext-11
> Fax: (562) 988-8539
>  Licensed by the California Department of Real Estate #01804460 & 00850137.
> This email is protected by the Electronic Communications Privacy Act, 18
> U.S.C. Sec. 2510-2521, is confidential and may be legally privileged. If you
> are not the intended recipient, you are hereby notified that any use,
> retention, dissemination, distribution or copying of this communication is
> strictly prohibited. Please reply to the sender that you have received this
> message in error, then delete it. Thank you.
>
>  		 	   		
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>

-- 
Sent from my mobile device

Rob DuMoulin
904.476.8744
rob at dumoulins.net