[DeTomaso] Coolant Tube Removal

Will Demelo wdemelo at cogeco.ca
Fri Apr 9 16:26:01 EDT 2010


In the bin they'll go. There is a pinhole leak in one of the pipes, so I'm replacing with stainless.
Will
  ----- Original Message ----- 
  From: MikeLDrew at aol.com 
  To: wdemelo at cogeco.ca ; detomaso at realbig.com 
  Sent: Friday, April 09, 2010 11:22 AM
  Subject: Re: [DeTomaso] Coolant Tube Removal



  In a message dated 4/9/10 8 10 16, wdemelo at cogeco.ca writes:



    Can the tubes under the car be removed without removing the engine? 


  >>>Sure, it's easy.  All you need is a sawzall to cut the long one in two.


    One of the runs has a coupling/joiner in the middle. Will that section come out?


  >>>Yes, the two halves come out easily.  After you've cut the long one in the same location, the two halves of that will come out easily too.  You can then clean up the cut ends and reuse that pipe if it's in decent shape.  But if it was in decent shape, why would you be removing them?

  So, I predict they will go into the bin. :>)

  Mike



More information about the DeTomaso mailing list