[DeTomaso] Cleaning Veglia gauges

JDeRyke at aol.com JDeRyke at aol.com
Tue Sep 29 19:51:33 EDT 2009


In a message dated 9/29/09 11:30:13 AM, eanderson at geotracinternational.com 
writes:

> Is it possible to remove the bezzle and glass in order to clean all the 
> dust specs out of my Veglia gauges?
> 
Yes. With a small flat blade screwdriver, pry a small section of the 
backside of the bezel up, and do this progressively around about 2/3 of the gauge. 
The bezel, glass and a rubber seal will eventually come off. Note the 
bezels are usually thin brass or steel and will only bend a few times before 
cracking, so go slow and be careful. To reassemble, reverse the above to reseal 
the bezel, glass and rubber seal. Good luck- J Deryke



More information about the DeTomaso mailing list