[DeTomaso] GT4 wheels & Offset

Orville Orville at Rubyglass.com
Sat Sep 19 18:20:56 EDT 2009


Jim and Michael,
My GT5S has the original rims and I have a spare set of front rims. They are
stamped with the size. The rims on my car are:
http://www.pixclix.com/Micro-Wave/Pantera/Wheels/DeTomaso-1.jpg Overall
Wheel and Tire
http://www.pixclix.com/Micro-Wave/Pantera/Wheels/Front-1.jpg Front Rim
Marking
The marking on my spare set is 10"K X 15" CH-ET-24 instead of the 22.5 which
are on the car. I have no idea what the 22.5/24 designation indicates.
I just measured my spare set backspacing and from a straightedge across the
inside rim surface to the flat mounting surface measures 4 5/8" on the 10"
rims.
I will have to remove a wheel to measure the backspacing on the 13" rim. I
will try to get to that tonight.

Orville
GT5S #9469

-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On
Behalf Of pantdino at aol.com
Sent: Saturday, September 19, 2009 3:18 PM
To: detomaso at realbig.com
Subject: Re: [DeTomaso] GT4 wheels & Offset (was FOR Sale Rant)



Micheal,
What are the backspacing and width measurements of your 10 spoke Campys? Do
you have the same flares Will will be using?
If so, the measurements of your wheels will tell us exactly what Will should
buy to prevent having to use a spacer.
Jim

-----Original Message-----

From: michael frazier <red3644 at hotmail.com>
Subject: Re: [DeTomaso] GT4 wheels & Offset (was FOR Sale Rant)

Something to remember...those flares were designed for the race cars.  They
ran 14" rear wheels.  I don't know what the factory did when they used the
flares with the 13" wheels on the GT5.  Those flares are completely
different than the Gp4 flares so that probably takes care of the spacing.  I
have factory style riveted flares with 10 spoke Campys.  They fit great with
a 1" spacer on the back.  

Michael Frazier
Gruppo Rompiculi Corsa 





More information about the DeTomaso mailing list