[DeTomaso] GT4 wheels & Offset (was FOR Sale Rant)

detomasoregistry at gmail.com detomasoregistry at gmail.com
Sat Sep 19 13:10:01 EDT 2009


I'd be happy to host the drawings and photos.  I might even supply a few of my own.

Chuck
(The Registry Guy)

-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] On Behalf Of Ken
Green
Sent: Saturday, September 19, 2009 10:01 AM
To: detomaso at realbig.com; Will Demelo
Subject: Re: [DeTomaso] FOR Sale Rant

Will,
 
    I think some simple drawings would really help, but you'd have to find someone or
someplace to post them.
 
    Regarding backset, if that is the measurement from the wheel mounting surface that
rests against the hub, to the inside tire mounting surface, why would it change if you add
flares?  Wouldn't that dimension remain the same and the wheel is just made wider?
 
   I need drawings to understand this.
 
Ken




From: Will Demelo <wdemelo at cogeco.ca>
Subject: [DeTomaso] FOR Sale Rant
To: detomaso at realbig.com
Date: Saturday, September 19, 2009, 6:56 AM


I appologise for last weeks post with the expletives.
I am trying to convert my car to GR4. The fibreglass flares are going to be riveted on,
just as from the factory.
I ordered wheels from a vendor last fall and the agreed upon price was not charged to my
card. Apparently there was more machining involved. After waiting 3-4 months, I gave up
and cancelled the order. The wheels had not beed started yet (confirmed by Kodiak). I had
to threaten credit card fraud to get my money back. 
I recently placed another order to another vendor. I was told that they had converted many
cars. I mounted the flares on my car using clamps and took measurements to the hub
surface.
After requesting the backspace measurements 3 times, I was finally told 4.5"F and 6.5"R.
The reproduction Campys I have on my car now, with stock narrow body, have a 6.25"
backspacing. Now I'm no math major, but how are new wheels, with almost the same
backspacing be correct after I extend the flares outward about 4"??
I was told by the vendor that I was doing things backwards. I should get the wheels and
then modify the flares to accomodate. I don't agree with this. There is zero movement with
my flares. They have to meet front and rear body lines and then the upper portion gets
pushed to meet the body.
I don't inderstand how I can't mount my flares to the body, take measurements and order
wheels with custom offsets.
Ron L has just spent $5500 on GR4  wheels from a vendor and he requires 1" spacers in the
rear. I know of another fellow with a factory GT5 and the GR4 wheels he ordered with
"factory" specs required 1 1/2" spacers in the rear and 3/4 in the front.
I'll be damned if I am going to spend uwards of $5k to then have to replace studs and
install spacers.
I try my best to send all info and communicate to only have vendors ship me parts, at my
expense.
Will
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.5.409 / Virus Database: 270.13.105/2380 - Release Date: 09/19/09 06:03:00




More information about the DeTomaso mailing list