[DeTomaso] Measurements needed!!

[Ken Green]

Will,
 
    If you have otherwise stock suspension, the hat would be behind the hub and the wheel rests against the hub.  If your hats are mounted outside the hub, you may need a different offset by the thickness of the hat.
 
Ken

--- On Tue, 9/15/09, Will Demelo <wdemelo at cogeco.ca> wrote:


From: Will Demelo <wdemelo at cogeco.ca>
Subject: [DeTomaso] Measurements needed!!
To: detomaso at realbig.com
Date: Tuesday, September 15, 2009, 4:16 PM


Does someone have there wheels off and could take a measurement for me. Hang a string with a weight off the outside lip of your fender and quarter and measure to the face of the hat (?). The hat is the part that the inside of the rim would sit if I'm using the right term.
I'm trying to determine if my suspension measurements are the same as stock.
Will
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso