[DeTomaso] Cruise control again--you how one project causes something else to break...?
Christopher Kimball
chrisvkimball at msn.com
Tue Sep 15 10:26:35 EDT 2009
Dear Larry,
Thanks for the into. Due to some modifications I've made, getting to the back of the speedo is difficult. Is there any other way I could check? Isn't there something on the old unit that would give me an idea of which one it is? My speedo is miles per hour.
Sincerely,
Chris
> From: fresnofinches at aol.com
> To: detomaso at realbig.com
> Date: Mon, 14 Sep 2009 22:45:47 -0700
> Subject: [DeTomaso] Cruise control again--you how one project causes something else to break...?
>
> Chris,
>
> You aren't quite home free, yet.
>
> Julian Kift posted this some time back at the PI forum:
>
> There are actually four ratios available for the angle drive two each
> for VDO and Veglia Borletti, depending whether your speedo is km/h or
> mph (ratios are 1.1:1 or 1:1) The back of your speedo will also be
> stamped with a ratio either 1600 rev/min or 1200 rev/min, knowing
> these you can work out which drive gear ratio you need.
>
> Julian
>
> So do a little more research before handing over your money for a
> replacement drive.
>
> Larry
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list