[DeTomaso] penetrants
Mountjoy
dsmtjoy at cox.net
Tue Sep 8 22:34:55 EDT 2009
Well, it's GOTTA be Ford... for that Fix Or Repair Daily stuff. :>))
Darrell
----- Original Message -----
From: boyd casey
To: Mountjoy
Cc: detomaso at realbig.com
Sent: Tuesday, September 08, 2009 5:27 PM
Subject: Re: [DeTomaso] penetrants
Is it Ford or GM atf?
Boyd
On Tue, Sep 8, 2009 at 8:24 PM, Mountjoy <dsmtjoy at cox.net> wrote:
Don't know if people have seen this but since so many of us are working on
our cars I thought I'd post this. Interesting findings...
Darrell
"The following may be of interest to those doing restorations.
Machinist's Workshop magazine tested penetrants for break out torque on
rusted nuts. They arranged a subjective test of all the popular penetrants
with the control being the torque required to remove the nut from a
"scientifically rusted" environment. The results are as follows;
Penetrating oil.......... Average load
None ........................ 516 pounds
WD-40 ..................... 238 pounds
PB Blaster ................ 214 pounds
Liquid Wrench ......... 127 pounds
Kano Kroil ................ 106 pounds
ATF-Acetone mix.........53 pounds
The ATF-Acetone mix was a "home brew" mix of 50-50 automatic transmission
fluid and acetone."
_______________________________________________
Detomaso Forum Managed by POCA
Archive Search Engine Now Available at http://www.realbig.com/detomaso/
DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list