[DeTomaso] Clutch woes in Asa's garage

[Göran Malmberg]

As I pointed out earlier in this tread, different pressure plates 
have different finger lever ratio. For example, my pressure plate
takes 1 1/2" of slave throw for a good release. This is a good 
thing for a heavy clamping force pressure plate since it lessen
the pushing force on the crankchaft AND the all bearingngs.
Goran

-----Ursprungligt meddelande-----
Från: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com]
För pantdino at aol.com
Skickat: den 7 september 2009 01:00
Till: detomaso at realbig.com
Ämne: Re: [DeTomaso] Clutch woes in Asa's garage


 Can someone explain why the new clutch would require more arm motion /
displacement from the rest position than the old one?


I can see how disc thickness, flywheel thickness, etc would change the
"rest" position of the clutch arm, but why would we suddenly need more
MOVEMENT of the arm / rotation of the ZF shaft?




 


 

-----Original Message-----
From: Asa Jay Laughton <asajay at asajay.com>
To: detomaso at realbig.com
Sent: Sun, Sep 6, 2009 2:42 pm
Subject: Re: [DeTomaso] Clutch woes in Asa's garage










What is the bore on a stock clutch master?

Asa Jay Laughton, MSgt, USAFR, Retired

& Shelley Marie
Spokane, WA

1971 Mach I Mustang  [ASA JAY]
1973 Pantera L 5533  [ASASCAT]
    
******************************     
http://www.asajay.com
http://www.teampanteraracing.com
  



Asa Jay Laughton wrote:
> The clutch effort reduction kit is installed properly, smooth and does

> not appear to have any wear.  It is well lubricated, still having some

> grease drips on the components.
>
> What is the thickness of a stock clutch disc?
>
> Asa Jay
>
> Asa Jay Laughton, MSgt, USAFR, Retired
>
> & Shelley Marie
> Spokane, WA
>
> 1971 Mach I Mustang  [ASA JAY]
> 1973 Pantera L 5533  [ASASCAT]
>     
> ******************************     
> http://www.asajay.com
> http://www.teampanteraracing.com
>   
>
>
>
> JDeRyke at aol.com wrote:
>   
>> 1)- I ALWAYS recommend a long-throw slave, in stainless steel if you
can 
>> find it for corrosion resistence as well. It WILL increase the
disengagement 
>> distance a little, as long as there's no leaks, internal or external,
at the 
>> clutch master and slave cylinders.
>> 2)- your L model has the clutch reduction kit in it. Check to see if
any of 
>> the steel-on-steel links and pins under the dashboard are badly worn
from 
>> lack of lube. This will soak up some motion from the clutch pedal.
>> Good luck- J Deryke
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> Archive Search Engine Now Available at
http://www.realbig.com/detomaso/
>>
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
>>
------------------------------------------------------------------------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com 
>> Version: 8.5.409 / Virus Database: 270.13.80/2349 - Release Date:
09/06/09 
05:51:00
>>
>>   
>>     
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at
http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.409 / Virus Database: 270.13.80/2349 - Release Date:
09/06/09 
05:51:00
>
>   
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso



 

_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso