[DeTomaso] clutch release lever and adjustment question
boyd casey
boyd411 at gmail.com
Sun Sep 6 23:26:05 EDT 2009
Thanks Mike, I saw your post on the GT-40 forum about the ZF and the gearing
excel spreadsheet. Your post was well written and informative as usual.
Thanks again for your help and advice.
Boyd
On Sun, Sep 6, 2009 at 1:08 AM, <MikeLDrew at aol.com> wrote:
>
> In a message dated 9/5/09 13 55 43, boyd411 at gmail.com writes:
>
>
> How hard should it be to pull the clutch release lever (with vise grips). I
> have been having trouble with my clutch disengaging and I am in the process
> of replacing the slave cylinder and master cylinder. Once I had my slave
> cylinder piston disconnected from the clutch release lever I tried moving
> the lever back with a vise grip and it was extremely difficult. How hard
> should it be and how far should I be able to move it and how much movement
> (typically) is there in taking up the free play 1/16th" or 1/2 " ??. What
> is
> the correct brake fluid to use #3 or # 4?
>
>
> It should be quite simple to move the lever until the fingers of the clutch
> arm touch the fingers of the clutch, at which point it then becomes
> impossible.
>
> The amount of movement to take up the free play is quite small--perhaps
> 1/8th or 1/16th of an inch?
>
> DOT3 or DOT3/4 is what you want.
>
> Mike
More information about the DeTomaso
mailing list