[DeTomaso] More cruise control issues
SOBill at aol.com
SOBill at aol.com
Tue Sep 1 13:48:31 EDT 2009
Chris,
The tach wire from the MSD to the adapter will be a 12V signal. It will
not damage your CC.
The tach signal from the tach adapter to the Pantera tach has 200 volt
transients which is not what your CC needs.
The issue of actual vehicle speed from the transmission or inferring
vehicle speed from a tach signal is an issue of signal frequency. Standard
speedo signal sources produce 1,000 pulses per mile. A Pantera in 5th gear at 60
mph will produces approximately 8,000 tach pulses per mile.
I wouldn't use the tach signal. If you put the clutch in and the engine
rpm falls the CC will open the throttle to try and keep the rpm up.
Have fun,
SOBill Taylor
_sobill at aol.com_ (mailto:sobill at aol.com)
**************A Good Credit Score is 700 or Above. See yours in just 2 easy
steps!
(http://pr.atwola.com/promoclk/100126575x1222846709x1201493018/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=115&bcd
=JulystepsfooterNO115)
More information about the DeTomaso
mailing list