[DeTomaso] C&N clutch master cylinder

[Asa Jay Laughton]

Do you mean a CNC master Cylinder?  I have one of those, but you need  
to put a rebuild kit through it.  Is that what you're looking for?

Asa Jay


Quoting boyd casey <boyd411 at gmail.com>:

>  I have been having a problem finding fittings for my stock Detomaso Clutch
> master cylinder.
>  I have contacted Panteras East, Wilkinson. PI motor sports,
> Precision Proformance, Pantera Performance center and none of them have
> Clutch hydraulic fittings in stock. Te Fitting the connects the flared
> copper line to the master cylinder is not a standard fitting and I have not
> been able to find one anywhere. I have had numerous list members try their
> sources to no avail. Procision Proformance has some being made but there are
> none currently available. I have been waiting for almost three weeks for
> them to get one in.  Wilkinson is supposed to have a stainless replacement
> being made but the story is the same. And I have been waiting for them to
> come through for the same length of time. I can't find anyone that still
> carries a C&N clutch master cylinder either. If anyone knows where I can get
> a C&N clutch master cylinder that is already set up to fit a pantera please
> let me know. At this point I am desperate. If someone can put me on the
> compression fitting that fits the stock master cylinder, or an A&N adapter
> along with the part # and source for a stainless line or braided stainless
> line that is actually available and that along with the adapter will fit the
> detomaso Clutch master cylinder, or a C&N clutch master along with the
> fittings and line or any other viable substitute I am all ears. My car has
> been stuck for three weeks  and I need to get it to be able to move under
> it's own power before winter sets in. I have two new stock Detomaso clutch
> master cylinders, a new slave cylinder, a new stainless braided line to
> replace the red plastic line that goes from the slave to the middle of the
> car where it meets the copper line. I need the fittings to join the copper
> line to the master cylinder or a new stainless hard line or a combination
> Hard stainless and braided stainless and the appropriate fittings  or a
> custom or after market Clutch master cylinder with the correct fittings.
> Please if anyone knows where I can accomplish this goal please let me know.
> Boyd
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>