[DeTomaso] Heater valve
Tomas Gunnarsson
guson at home.se
Thu May 21 02:22:11 EDT 2009
Adjust the cable to shut completely and not open fully, that'll be enough.
Tomas
----- Original Message -----
From: "Ed Pike" <erpike at ymail.com>
To: <dfcex at pacbell.net>
Cc: <detomaso at realbig.com>
Sent: Thursday, May 21, 2009 4:14 AM
Subject: Re: [DeTomaso] Heater valve
> dan
> the problem is that the temperature lever doesn't have enough movement to completely close the water valve. I played with this a lot and bent a couple of cables before I figured this out. my solution was to install a manual water valve that I can reach from the drivers seat in front of the standard water valve. when I want ac I close the manual valve and open it up for heat . the factory water valve still works and is controlled by the temp lever.
> ed....
>
> Dan Courtney wrote:
>> The Winged Warrior had a substantial amount of heat entering with the heater turned off. Actually, on or off, it's the same amount of heat.
>> Is this typically due to a bad heater valve? Or simply the hoses being crossed?
>> For years I ran with the heater hose cut-off valves closed, I may have to return to that format for the Reno roadtrip.
>> Dan
>> Dan F. Courtney
>> La Jolla, CA
>> (858) 551-5455 Phone
>> (858) 551-5456 Fax
>> _______________________________________________
>> Detomaso Forum Managed by POCA
>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list