[DeTomaso] Gap for sparkplugs with MSD

[Dan Courtney]

Thank you very much, Dave. I'll start at .45 and see how it works.
Seems like the PepBoys recomendation of .35 just leads to fouling.

Dan
Dan F. Courtney

La Jolla, CA

(858) 551-5455 Phone
(858) 551-5456 Fax
----- Original Message ----- 
From: "Dave Londry" <davel at emspace.com>
To: <cuvee at sbcglobal.net>
Cc: <detomaso at realbig.com>; "Dan Courtney" <dfcex at excaliburre.com>
Sent: Monday, May 18, 2009 1:44 PM
Subject: Re: [DeTomaso] Gap for sparkplugs with MSD


>I just collected a bunch of references for gap with an MSD  Blaster.
> The summary was.
> "Start at .045 and increase by .005 steps until you don' t like it.
> Then back it off by half a step."
> dave
> 
> 
> Curt Hall wrote:
>> About .50/55 I think.
>>
>> --- On Mon, 5/18/09, Dan Courtney <dfcex at pacbell.net> wrote:
>>
>> From: Dan Courtney <dfcex at pacbell.net>
>> Subject: [DeTomaso] Gap for sparkplugs with MSD
>> To: detomaso at realbig.com
>> Date: Monday, May 18, 2009, 1:03 PM
>>
>> I set the last set at .35, then saw a post calling for a bigger gap.
>> Does anyone remember the recommended gap?
>>
>> Dan
>> Dan F. Courtney
>>
>> La Jolla, CA
>>
>> (858) 551-5455 Phone
>> (858) 551-5456 Fax
>> _______________________________________________
>>   
> 
>