[DeTomaso] Fw: 72 Seat belts
JDeRyke at aol.com
JDeRyke at aol.com
Fri May 15 17:51:38 EDT 2009
For those who are considering using the popular Hall-type crossbar to use
with aftermarket shoulder harnesses, be aware that not all cars are exactly
identical in bolt spacing across the rear window area. And since the bars
often sold are made of 5/8" thick x 1" wide cold-rolled steel, correcting this
is not trivial, even if you take the easy way out and just hog out the bolt
holes.
A more elegant way is to bolt one side in the car, eyeball the mismatch on
the other side, then take the bar to a BIG, well-anchored vise or hydraulic
press and bend one bar end so the boltholes fit your car correctly. It may
take a couple of tries but the results look more pro, doesn't crack the
flat-black paint and won't rattle around on bumpy roads. It may actually stiffen
up the structure a little. FWIW- J Deryke, who's done this on two Panteras
(not ours)
**************
Recession-proof vacation ideas. Find free things
to do in the U.S.
(http://travel.aol.com/travel-ideas/domestic/national-tourism-week?ncid=emlcntustrav00000002)
More information about the DeTomaso
mailing list