[DeTomaso] My stock flywheel on 5533

[Asa Jay Laughton]

FREAKIN BRILLIANT!

Here is the link:
http://www.teampanteraracing.com/index.php?option=com_g2bridge&view=gallery&Itemid=57&g2_itemId=2389&g2_GALLERYSID=TMP_SESSION_ID_DI_NOISSES_PMT

and in tinyurl mode:
http://tinyurl.com/rbpgcl

Geez... now if I only had a brain.

Asa Jay


Asa Jay Laughton, MSgt, USAFR, Retired

& Shelley Marie
Spokane, WA

1971 Mach I Mustang  [ASA JAY]
1973 Pantera L 5533  [ASASCAT]
    
******************************     
http://www.asajay.com
http://www.teampanteraracing.com
  



Asa Jay Laughton wrote:
> Hi all,
>
>  From Asa Jay's garage comes the tale of flywheel discoveries.  As most 
> of you know, I'm a real novice at some of this stuff; my book learnin' 
> only gets me so far.  :)
>
> Today I removed the flywheel from my stock 351C in order to deliver it 
> to a local shop for machining.  It has some heat checking so while I'm 
> in there, why not take it down and have it fixed up?  Why NOT?  Because 
> if I keep doing this I'll end up with a full on from off restoration AND 
> I DON'T WANT TO DO THAT YET! <pant, pant, pant>
>
> Okay, back to reality here.  First, the bolts were nice and tight, but 
> as they came off, they felt like they were glazed in place.  It's kind 
> of odd to describe, but they did come out clean.  I'll probably use a 
> light wire brush on them and then clean the threads in the crank before 
> re-assembly.  Then the flywheel came off, it was lighter than I had 
> imagined, which made me happy as I lifted it out oft the engine area.
>
> Next I removed the rear block plate.  It's that big chuck of flat metal 
> that protects the spinning stuff from road hazards, like lizards.  (it's 
> an -in- joke, you had to be there).  So anyway.... I get the plate 
> removed and flip it over to see the block side.  Wow!  What's this, it 
> looks like a foam gasket.  Hmmm, it appears to help prevent any rear 
> main leakage from passing into the flywheel side and scattering about 
> the clutch.  Nice!  I learned something today.  Photos later.
>
> So then I took the flywheel and the plate, and took some pictures.  
> You'll note the flywheel has both a cast part number and a stamped part 
> number.  I don't really  know why, maybe someone here can answer it.
>
> The back of the block has some red RTV.  I don't know if this was 
> something done at the factory or not, but I'm betting it was as the rest 
> of everything doesn't look like it was ever removed since new.  You'll 
> note the block plug at the rear of the cam is installed in the same 
> orientation as the other core plugs.  I also took some close ups near 
> the crank.  I do believe my rear main is passing some oil.  Now's a good 
> time to replace it, but if I take one more step on this slippery slope I 
> won't be driving the car again for 10 years and I don't want that.  I'll 
> probably just RTV the pan junction, see about some foam replacement on 
> the back of the metal plate and just re-assemble.  I plan to do an 
> engine in the next few of years and I think I can stand a bit of oil 
> seepage for now.  Also note the pilot bearing.  Click to get the 
> enlarged photo and you'll see the cage for the pilot bearing is actually 
> broken and one of the needles is pushed back.  hmmm.
>
> Okay, so the photos are here:
>
>
> Please have a look.
> Asa Jay
>
> Asa Jay Laughton, MSgt, USAFR, Retired
>
> & Shelley Marie
> Spokane, WA
>
> 1971 Mach I Mustang  [ASA JAY]
> 1973 Pantera L 5533  [ASASCAT]
>     
> ******************************     
> http://www.asajay.com
> http://www.teampanteraracing.com
>   
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.329 / Virus Database: 270.12.29/2114 - Release Date: 05/14/09 06:28:00
>
>