[DeTomaso] Brake Pad to Rotor Match, OK to trim pads???
John Taphorn
jtaphorn at kingwoodcable.com
Wed May 6 23:08:56 EDT 2009
Ken
I have performed the pad trim on my GT5 rears pads that extend 1/8" past the
rotor. Zero issues.
JT
----- Original Message -----
From: <kenn_green at yahoo.com>
To: <detomaso at realbig.com>
Sent: Wednesday, May 06, 2009 9:20 PM
Subject: [DeTomaso] Brake Pad to Rotor Match, OK to trim pads???
>
> I have been working with a local shop for about 3 years on an upgrade
> which includes Porsche 996 turbo calipers. We are about done, but are
> having trouble finding an off the shelf rotor with as much radial extent
> and the pads, 2.4 inches. The rotors I found are almost large enough,
> maybe 1/8 inch less radial extend than the pads, but the pads extend past
> the outer radius of the rotors using the Wilwood "Pantera" hats with an 8
> on 7 5/8 bolt pattern. The pads have to clear the hat bolts on the inside
> radius of the pads. It also looks like there are clearance issues if the
> IDs of the rotors are reduced.
>
> I've talked to pad makers and they all say it's fine to trim off friction
> material and people have told me they do it all the time. Does anyone have
> experience with pads that are larger than the rotors, or trimming the
> pads? Any red flags? I am talking about removing an arc of about 1/12 of
> the pad radial dimension. They are BIG pads.
>
> Ken
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list