[DeTomaso] Replacement for Hall Pantera Brake Master Cylinder

[Mike Reilly]

Thanks Mike.  I just signed up with the forum tonight, not lurking :)
 I had been off it for years when my work was all consuming.  Now the
car is calling out to me again and it's spring time in Seattle!

On Tue, May 5, 2009 at 10:19 PM,  <MikeLDrew at aol.com> wrote:
>
> In a message dated 5/5/09 21 53 53, reillyms at gmail.com writes:
>
>
> The only
> numbers I see on it are "E2TA".  I have seen mention that Hall used a
> 1984 Ford Ranger unit (E2TA-2155), which looks right from the pics
> I've seen.  It has a 15/16" bore.  [snip]  As I said my
> objective is a simple replacement with the exact same unit that Hall
> used in 1992 so I can quickly get driving again with minimal work and
> expense ; )
>
>
> Mike,
>
> Nice to hear from you!  You've been a lurker I guess.  Nothing new to you.
> ;>)
>
> Sounds like you've already done your homework; I wasn't aware of the
> specific application for Hall's M/C but it was always rumored to come from a
> Ford truck.  Armed with the part number, I'd trot down to your local auto
> parts store and buy a replacement.  Then when you remove the old one, take
> it apart and measure the bore to ensure they are the same; presuming they
> are, then you're in business. :>)
>
> Mike
>
>
> **************
> Big savings on Dell’s most popular laptops. Now starting at $449!
> (http://pr.atwola.com/promoclk/100126575x1221827510x1201399090/aol?redir=http:%2F%2Fad.doubleclick.net%2Fclk%3B214663377%3B36502382%3Bh)