[DeTomaso] Pantera Front Suspension Ball Joint and Bushing Tools
SOBill at aol.com
SOBill at aol.com
Mon Mar 23 01:27:33 EDT 2009
FWIW,
Mike Dailey has added an article describing an easily fabricated tool for
removing Pantera front ball joints at _http://www.panteraplace.com/Page9.htm_
(http://www.panteraplace.com/Page9.htm) .
Mike has also added two articles on removing and installing Pantera front
a-arm bushings. One article describes a method using a bench vise and some
simple pressing fixtures. The second article describes using a portable press
which employs and inexpensive bottle jack and some simple pressing fixtures.
The bench vise method article is at _http://www.panteraplace.com/page211.htm_
(http://www.panteraplace.com/page211.htm) .
The portable press method article is at
_http://www.panteraplace.com/page210.htm_ (http://www.panteraplace.com/page210.htm) .
For anyone who is interested in using either of these methods, I have the
required adapters, saws/pilots, and press fixture to lend for the cost of
shipping. The portable fixture is shipped without a bottle jack. The portable
fixture uses a 4 ton bottle jack (_http://www.harborfreight.com/cpi/ctaf/displayite
m.taf?Itemnumber=66450_
(http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=66450) about $14) from Harbor Freight. It is cheaper for the
user to buy and ship a bottle jack one way from Harbor Freight than to ship a
loaner jack two ways.
These tools will allow you separate Pantera front ball joints and remove or
install front suspension bushings like a gentleman. None of these tools or
methods require the use of a hammer.
Have fun,
SOBill Taylor
sobill at aol.com
**************Feeling the pinch at the grocery store? Make meals for Under
$10. (http://food.aol.com/frugal-feasts?ncid=emlcntusfood00000002)
More information about the DeTomaso
mailing list