[DeTomaso] Lowered Pantera equals VIBRATION

[MikeLDrew at aol.com]

In a message dated 3/16/09 14 01 8, seanmundy at hotmail.com writes:


> I checked the wheel nuts were all tight and all my axle bolts tight. When 
> lowered, could my axles be causing the vibration because they have changed 
> angles and under acceleration the angle is even more severe?  Are they out of 
> balance? Any other ideas ?
> 

I doubt it's the axles.   I'd suspect driveshafts, perhaps bad U-joints?   Or 
loose driveshaft bolts--that's a big gotcha.

Mike


**************
Feeling the pinch at the grocery store?  Make dinner for 
$10 or less. (http://food.aol.com/frugal-feasts?ncid=emlcntusfood00000001)