[DeTomaso] slave cylinder change

[MikeLDrew at aol.com]

In a message dated 6/8/09 11 27 27, steveblum2 at msn.com writes:


> My manual has nothing about changing the cyliner. It appears straight 
> foward but that is how I usually get in trouble. Any suggestions before I 
> start?
> 

>>>It really is as straightforward as it appears.   Disconnect the spring 
from the lever on the gearbox, and then disconnect the pushrod from the 
lever.   Remove the bottom snap ring, and the slave cylinder will slide up and 
out of the bracket.   Then disconnect the hydraulic line, attach it to your 
new slave, and install the new one in the reverse sequence.

Cheers!

Mike


**************
A Good Credit Score is 700 or Above. See yours in just 2 
easy steps! 
(http://pr.atwola.com/promoclk/100126575x1221322977x1201367197/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=62&
bcd=JunestepsfooterNO62)