[DeTomaso] Comp Cams Kit

[Thomas Borcich]

Dan, it was my typo...here are your suggested cam specs for my motor...I'm off by 1 degree on the LSA...your suggestion was the 

Reed
Cam that you specd, probably the same Mikes using.... "228/232 degrees @ 0.050" lift (280/284 @
0.006"), 0.588"/0.588" lift,
107 LSA, 68 degrees 

overlap, installed in the engine on a 104 intake 
centerline, Reed Cams # 535-TM280HR-284HR-107A." 





Yes, I am running 1970 4V quenched heads ( not sure if they have been cut) with .030 over forged speed pro flat top pistons.  

Tom