[DeTomaso] Comp Cam Kits
Paul Timko
thedrol at pobox.com
Thu Jul 30 13:48:06 EDT 2009
I used a Comp Cams kit on my first rebuild with no issues. The
convenience of one stop shopping is useful, plus you know that the
components all match. Unfortunately you need a custom grind in order to
get a 351C cam that isn't 110 LSA from Comp Cams.
Paul
#9270
Thomas Borcich wrote:
> Any one had experience with the Comp Cams kits. I'm finishing up my heads
> and need springs, keepers, retainers, teflon seals, pushrods, a timing set,
> studs, cam and lifters. Everything matched for $485 through Summit.
> They're Xtreme Energy are Hydralic Flat Tappet cam kits that looks pretty good.
> Any feedback on quality of their products?
>
> The one issue that I have is they have an LSA=110 on all their in stock Cleveland
> cams vs. 106 that Dan Jones suggests. Its only 4 degrees but the 106 brings
> the torque to a lower rpm...obviously a benefit for the cleveland. I'm going
> to check if they will make the cam with a specific grind.
>
> Regards,
>
>
> Tom
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
More information about the DeTomaso
mailing list