[DeTomaso] Oil Gauge Reading

[detomasoregistry at gmail.com]

Did it just change functioning, or did something else change too?  
(Like you installed a new sender.)

Chuck


> My oil gauge is not working correctly on my Pantera.  When the key is in
> the accessory position, the needle goes below zero.  Then, when I start
> the car, it pegs at full scale immediately.  What is the most likely
> culprit here: sending unit, gauge, or the wire between them?  Does
> anyone have any advice on how to troubleshoot this?  Thanks for any and
> all help.
> 

Sounds like you have the wrong sending unit.   They are externally 
identical, but internally quite different.   The one for an idiot light is an on/off 
switch.   That's why it sends your gauge from zero to pegged.   The one for 
a gauge is linear in its output.

Trot on down to your local parts store and you'll find what you need for 
about twelve bucks.   Just tell 'em it's for a '72 Mustang with an oil 
pressure GAUGE and not a light. :>)

Mike


**************
A Good Credit Score is 700 or Above. See yours in just 2 
easy steps! 
(http://pr.atwola.com/promoclk/100126575x1222585106x1201462830/aol?redir=http://www.freecr
editreport.com/pm/default.aspx?sc=668072&
hmpgID=115&bcd=JulystepsfooterNO115)
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso
No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.5.392 / Virus Database: 270.13.31/2264 - Release Date: 07/26/09 11:07:00