[DeTomaso] Front caliper bolt size?
Ken Green
kenn_green at yahoo.com
Fri Jul 17 12:46:49 EDT 2009
Bill,
I need a socket head screw and found them at McMaster Carr, but they are 12.9 not 8.8 , it that OK?
This is for a bracket to adapter Porsche calipers and there isn't room for a hex head.
Ken
--- On Fri, 7/17/09, SOBill at aol.com <SOBill at aol.com> wrote:
From: SOBill at aol.com <SOBill at aol.com>
Subject: Re: [DeTomaso] Front caliper bolt size?
To: kenn_green at yahoo.com, detomaso at realbig.com
Date: Friday, July 17, 2009, 8:36 AM
Ken,
Just checked my '74 caliper mounting bolts (my front end is STILL apart).
12 x 1.25 x 35mm grade 8.8
8.8 is the standard automotive grade ..... the same as SAE 5.
The grade 10.9 bolts in the front end are used to mount the steering arm/caliper mount to the upright.
Have fun,
SOBill Taylor
sobill at aol.com
Snoop, Lil Wayne, Lady GaGa -- land the tix you need for this summer's biggest tours. Tourtracker.com
More information about the DeTomaso
mailing list