[DeTomaso] Booster talk

[Richard Turpin]

The problem with aftermarket boosters is the mounting bolt pattern. The 
aftermarket boosters sold by the Pantera venders has the correct bolt 
pattern.
Richard Turpin
----- Original Message ----- 
From: "Larry - Ohio Time Corp" <larry at ohiotimecorp.com>
To: "'boyd casey'" <boyd411 at gmail.com>
Cc: <detomaso at realbig.com>
Sent: Thursday, July 16, 2009 10:37 AM
Subject: Re: [DeTomaso] Booster talk


> Hi Boyd,
>
>
>
> This link should work.
>
>
>
> http://www.piratejack.net/Tech-Support/Booster-Master-Cylinder-Specifcations
> .html
>
>
>
> Model PB7537 dual diaphragm
>
>
>
>
>
> Larry - Cleveland
>
>
>
>  _____
>
> From: boyd casey [mailto:boyd411 at gmail.com]
> Sent: Thursday, July 16, 2009 10:27 AM
> To: larry at ohiotimecorp.com
> Cc: detomaso at realbig.com
> Subject: Re: [DeTomaso] Booster talk
>
>
>
> The link to the ebay listing didn't go through. It said the item had been
> removed. From what I understand the need for a booster may be predicated 
> on
> your available vacuum. Some cars have systems that interfere with or limit
> available vacuum and that creates a problem when braking. I don't know
> enough about it but there have been several posts dealing with the 
> subject.
> When there is not sufficient vacuum available it takes allot more physical
> pressure on the brake pedal to achieve the same braking force and I 
> believe
> it also effects brake pedal height. See if you can find the "missing link"
> or another link to the actual manufacturer of the item you are referencing
> and I'm sure you will get a straight answer.
>
> Boyd
>
> On Thu, Jul 16, 2009 at 10:11 AM, Larry - Ohio Time Corp
> <larry at ohiotimecorp.com> wrote:
>
> Guys,
>
>
>
> With all the talk about boosters has anyone used the small street rod
> boosters you see in the cars? This one is only 7" (hmmm) and should fit. 
> The
> Corvette M/C would just bolt on.
>
>
>
> http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem
> <http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem
> <http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=380139863150&
> viewitem=&sspagename=ADME%3AB%3ASS%3AUS%3A1123> &item=380139863150&
> viewitem=&sspagename=ADME%3AB%3ASS%3AUS%3A1123>
> &item=380139863150&viewitem=&sspagename=ADME%3AB%3ASS%3AUS%3A1123
>
>
>
> I am thinking about using a dual M/C set up with the balance bar. From 
> what
> I read you do not need a booster with this set up. Is that right?
>
>
>
> Thanks,
>
>
>
> Larry - Cleveland
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>