[DeTomaso] Oil temp sending unit

[JDeRyke at aol.com]

Electrical sending units can fail their seal without affecting the gauge 
readings, so first, be very sure where the failure is- inside or outside the 
sending unit. If something is leaking thru the sender, replacement is your 
only cure. Some are rivited together and I've seen a fine strwa, of 
pressurized oil squirting out of the rivit. If its the outer threads, yes- use teflon 
pipe tape on the threads. The tape not only seals the space between sending 
unit and pan threads, it lubricates them so the parts screw together easier 
without destroying either set of threads. Good luck, Charlie- J Deryke



**************
An Excellent Credit Score is 750. See Yours in Just 2 Easy Steps! 
(http://pr.atwola.com/promoclk/100126575x1222585089x1201462806/aol?redir=http:/
/www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=62&
bcd=JulyExcfooterNO62)