[DeTomaso] Plasma cutter
Mark
shelbygt at cfu.net
Sat Jan 10 00:25:50 EST 2009
My old Sawzall and air grinder are sounding better all the time.....
----- Original Message -----
From: "Rich" <hoppe1 at cox.net>
To: "Mark" <shelbygt at cfu.net>; "bill gaino" <gaino at earthlink.net>;
<spkorb at spkorb.org>; "Sean Korb" <spkorb at gmail.com>
Cc: "DetomasoList" <detomaso at realbig.com>
Sent: Friday, January 09, 2009 7:10 PM
Subject: Re: [DeTomaso] Plasma cutter
> Also shut the plasma cutter off before you even think about touching the
> tip.
> It sounds stupid now but I took my glove off to look at the tip.
> The machine was on but I did not trigger the cutter.
> I was shocked through both arms and accross the chest like I have never
> been
> shocked.
> I think it was a Jesus moment but I am still here to tell you DON'T
> REMOVE
> GLOVES AND SHUT MACHINE OFF BEFORE TOUCHING THE TIP!!!!
> happy to still be alive Rich
> ----- Original Message -----
> From: "Mark" <shelbygt at cfu.net>
> To: "bill gaino" <gaino at earthlink.net>; <spkorb at spkorb.org>; "Sean Korb"
> <spkorb at gmail.com>
> Cc: "DetomasoList" <detomaso at realbig.com>
> Sent: Friday, January 09, 2009 2:42 PM
> Subject: Re: [DeTomaso] Plasma cutter
>
>
>> Yikes! Thanks for the heads up!
>>
>> ----- Original Message -----
>> From: "bill gaino" <gaino at earthlink.net>
>> To: <shelbygt at cfu.net>; <spkorb at spkorb.org>; "Sean Korb"
>> <spkorb at gmail.com>
>> Cc: "DetomasoList" <detomaso at realbig.com>
>> Sent: Friday, January 09, 2009 3:24 PM
>> Subject: Re: [DeTomaso] Plasma cutter
>>
>>
>>> We used mine last week to gut my muffs. My stepson used it for an hour
>>> without eyewear and it fried his eyes very bad. We did not think much
>>> about the flash because it is under the handle. Dont make this mistake!
>>> Bill
>>>
>>> -----Original Message-----
>>>>From: shelbygt at cfu.net
>>>>Sent: Dec 26, 2008 7:24 AM
>>>>To: spkorb at spkorb.org, Sean Korb <spkorb at gmail.com>
>>>>Cc: DetomasoList <detomaso at realbig.com>
>>>>Subject: Re: [DeTomaso] Plasma cutter
>>>>
>>>>I see Miller makes a Plasma cutter too. I have a Millermatic Mig
>>>>welder I bought 20 years ago and it still works great. Of course it
>>>>doesn't get a ton of use. I may try to grab a used one off of Ebay. I
>>>>don't do a lot of metal work but it's nice to have the tools when I do.
>>>>
>>>>I'm putting a V8 in an old Econoline and neet to fabricate a
>>>>transmission mount and crossmember with motor mounts. These things
>>>>came with straight 6's only so I might try to modify an existing
>>>>crossmember. To do that I'll need to cut the old mounts off and it
>>>>seems a plasma cutter would be the best way. I'm sure I'll find other
>>>>uses once I have it. That's just the current need.
>>>>
>>>>Quoting Sean Korb <spkorb at gmail.com>:
>>>>
>>>>> On Thu, Dec 25, 2008 at 9:57 PM, <shelbygt at cfu.net> wrote:
>>>>>
>>>>>> A little off the subject, but does anyone have suggestions for a
>>>>>> plasma cutter for the do-it-yourselfer?
>>>>>>
>>>>>
>>>>> Even if you get a cheap one like I did, you'll wonder how you got
>>>>> through
>>>>> life without it. It makes you go "Buah-hah-hah-hah!" sort of like
>>>>> 5000RPM
>>>>> in 2nd gear does. I have a bottom of the line Drag-gun with an
>>>>> onboard
>>>>> air
>>>>> supply. It's heavy, but compact and I can bring it to any site that
>>>>> has
>>>>> a
>>>>> 110v outlet. It won't do more than 3/16" plate though and it
>>>>> complains
>>>>> a
>>>>> bit doing that. Now I'd like to have a larger model with shop air,
>>>>> but
>>>>> I
>>>>> won't be trading this one in :) It's great for junk yard duty and
>>>>> will
>>>>> cut
>>>>> a car into as many pieces as you please. It's just not as much good
>>>>> for
>>>>> tow
>>>>> hitches :) Here's an ad for it from Grainger
>>>>> http://www.grainger.com/Grainger/items/5UV90
>>>>>
>>>>> It has some consumables; they come in bags full and that seems
>>>>> expensive
>>>>> but
>>>>> there are 10 or so electrodes per bag. I'd get a bag of electrodes
>>>>> and
>>>>> a
>>>>> bag of nozzles. The nozzles last through 5 or 6 electrodes... I'd say
>>>>> one
>>>>> electrode per car that you back halve:
>>>>> http://www.bacomatic.org/~dw/cars/suprang/2bits.htm
>>>>>
>>>>> --
>>>>> Sean Korb spkorb at spkorb.org http://www.spkorb.org
>>>>> '65, '68 Mustangs, '68 Cougar, '78 R100/7, '60 Metro, '59 A35, '71
>>>>> Pantera
>>>>> #1382
>>>>> "The more you drive, the less intelligent you get" --Miller
>>>>> "Computers are useless. They can only give you answers." -P. Picasso
>>>>> _______________________________________________
>>>>>
>>>>> Detomaso Forum Managed by POCA
>>>>>
>>>>> Archive Search Engine Now Available at
>>>>> http://www.realbig.com/detomaso/
>>>>>
>>>>> DeTomaso mailing list
>>>>> DeTomaso at list.realbig.com
>>>>> http://list.realbig.com/mailman/listinfo/detomaso
>>>>>
>>>>
>>>>
>>>>
>>>>_______________________________________________
>>>>
>>>>Detomaso Forum Managed by POCA
>>>>
>>>>Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>>>
>>>>DeTomaso mailing list
>>>>DeTomaso at list.realbig.com
>>>>http://list.realbig.com/mailman/listinfo/detomaso
>>>
>>
>>
>> --------------------------------------------------------------------------------
>>
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - http://www.avg.com
>> Version: 8.0.176 / Virus Database: 270.10.5/1884 - Release Date: 1/9/2009
>> 8:38 AM
>>
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
>>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.10.5/1884 - Release Date: 1/9/2009
8:38 AM
More information about the DeTomaso
mailing list