[DeTomaso] alternator brackets

[P. Rimov]

Morning Mark:

A while back I made a new alternator Sandon specific AC bracket so that I 
could run a single belt( serpentine) I could probably  make a plate with an 
alternator arm bracket that mounts to the underside of your existing bracket 
that relocates the alternator below the original position easily enough. You 
would have to purchase the turnbuckle to adjust the belt tension from some 
one like March http://www.marchperf.com/pg51.html#rods.  I can forward a 
couple of pics of it if you wish.


Paul
----- Original Message ----- 
From: "Tomas Gunnarsson To: List-Subscribe:" 
<guson at home.sedetomaso@realbig.comhttp://list.realbig.com/mailman/listinfo/detomaso>; 
"Sender: detomaso-bounces at realbig.com" 
<mailto:detomaso-request at list.realbig.com?subject=subscribe>
Sent: Tuesday, January 06, 2009 3:19 AM
Subject: Re: [DeTomaso] alternator brackets


> An adapter for installing a rotary compressor shouldn't be too hard to 
> modify to hold an alternator instead.
>
> Pics of an adapter are available at Panteraplace. 
> http://www.panteraplace.com/page123.htm
>
> Tomas
>
> ----- Original Message ----- 
> From: "mark skwarek" <ehpantera at yahoo.com>
> To: <detomaso at realbig.com>
> Sent: Tuesday, January 06, 2009 6:11 AM
> Subject: [DeTomaso] alternator brackets
>
>
>> I'm looking for an alternator bracket that will mount it down low where 
>> the A/C was. Any suggestions?
>> Mark
>>
>>
>>
>>
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>