[DeTomaso] MUSTANG ROTORS - WAS: Which Loctite
Ian H
ihannington286720mi at comcast.net
Fri Jan 2 10:28:03 EST 2009
Well, my EBC rotors came just now and they are one piece. That's the bad
news. The good news is that I found a local parts store that has the
Wagners. The even better news is that they are $47.99 each! That makes the
20% restocking fee for the EBC's a lot easier to swallow.
Ian
----
- Original Message -----
From: <fresnofinches at aol.com>
To: <detomaso at realbig.com>
Sent: Thursday, January 01, 2009 4:20 PM
Subject: [DeTomaso] MUSTANG ROTORS - WAS: Which Loctite
> Ian,
>
>
>
> This is too late for your installation, but it bears repeating.
>
>
>
> John Taphorn has reported there IS a replacement 66 Mustang rotor that
>
> is still supplied as a two piece unit. Hub/hat unit and a separate rotor,
> the
>
> two of them held together with the wheel studs.
>
>
>
> This is an important design detail. Read on.
>
>
>
> He further states that the shoulder size for the studs in this unit is the
> same
>
> as the stock Pantera metric studs. Thus, you remove the metric studs from
>
> your OEM rotor, remove the SAE studs from the new rotor,? and swap your
>
> stock studs to the new assembly.
>
> Your only mismatch will be the Pantera hub dust cover does not fit the
> Mustang hub.?
>
>
>
> This item is supplied/made by Wagner. They are an old time USA brake
> system
>
> parts manufacturer, and no doubt tooled up for these Mustang units decades
>
> ago, unlike the new China manufacturers. To save costs, the China units
> are
>
> all one-piece hub/rotor pieces. Likewise, to save costs, Wagner continues
> to
>
> make theirs as two piece units - as originally supplied by Ford on the
> Mustang.
>
>
>
> Additionally, John says the separated rotors can, with perhaps some minor
>
> caliper grinding, be a direct swap for the REAR rotors, too. John has done
>
> this install personally.
>
>
>
> I have four of these sitting on the shelf, and hope to do the install this
> winter.
>
>
>
> Wagner part # is 60209. Made in the USA!!
>
>
>
> RockAuto (located in Wisconsin) website shows they will sell, and ship,
>
> TWO of these to my CA address for $145.89 - not each,? but BOTH.
>
> Required dust covers are DORMAN # 13975:? $2.98 each.
>
> Go to their home page -
>
> http://tinyurl.com/8afqsp
>
> Click 'part number search', punch in 'BD60209' (leave the other selection
> windows blank) and you're there.
>
> Larry
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list