[DeTomaso] Fluidyne and Spal fan issue with Mounting fans

[Asa Jay Laughton]

Carefully drill and rivet some brackets to the top and bottom frame of 
the radiator. As I recall, there are no coolant tubes behind there, but 
you need to confirm.

Asa Jay

Asa Jay Laughton, MSgt, USAFR, Retired

& Shelley Marie
Spokane, WA

1971 Mach I Mustang  [ASA JAY]
1973 Pantera L 5533  [ASASCAT]
    
******************************     
http://www.asajay.com
http://www.351c.info
  



clay willmott wrote:
>  
> I removed my fluidyne/fan assembly that was recently installed prior to my purchase with the push in style pins.  They are the type that is pushed through the core.
>  
> I have had the radiator pressure checked and it tests fine.
> I have now taken the radiator and fan set up to 2 shops where it sat for a week and then I was told they cant mount it or are afraid to weld on it.  I have called 4-5 other shops-no luck or they suggested the push in pins again.  The aftermarket plastic brackets that push through into the fans do not match up on the edges of the radiator and dont work.
>  
>  
> Is there an easy way a DIY can get this done?  The fans and radiator are identical to the pic/catalog on the PIM.site if a visual would be helpful.
>  
> Any suggestions greatly appreciated.
>  
> Thanks
>  
> Clay
>  
>  
>  
> _________________________________________________________________
> Windows Live™: Keep your life in sync. 
> http://windowslive.com/explore?ocid=TXT_TAGLM_WL_t1_allup_explore_022009
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.0.234 / Virus Database: 270.10.20/1943 - Release Date: 02/10/09 07:20:00
>
>