[DeTomaso] ring gear safety wire
Tomas Gunnarsson
guson at home.se
Mon Feb 9 12:26:49 EST 2009
If all bolt heads were broken off, what kept the parts together?
Tomas
----- Original Message -----
From: <fresnofinches at aol.com>
To: <detomaso at realbig.com>
Sent: Monday, February 09, 2009 6:17 PM
Subject: [DeTomaso] ring gear safety wire
> We had a PCNC member who dedided to change his new Pantera's ZF gear oil.
>
> In the process, a ring gear bolt head plopped out into the drain pan.
> He then started fishing through the drain plug hole, using a stiff piece of wire.
>
> By the time he was through, he had all ten bolt heads and three sections of
> thread .? He brought a plastic bag with the pieces to a tech session.
>
> His ZF made no noise and shifted fine.
>
> Nonetheless, he decided he needed to safety-wire his ring and pinion.
>
> Just because you have many uneventful miles, no noise and no apparent issue
> does not mean you don't have a problem.
>
> Larry
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list