[DeTomaso] New trunk insert

[michael@michaelshortt.com]

Sounds very nice, please share photos when available.

Michael Shortt

On Sun, Dec 13, 2009 at 6:51 PM, Kirk Evans <kre at adelphia.net> wrote:

> Hi all,
>
> I'm building a new trunk insert THAT WILL NOT RUB THE PAINT on finished
> engine compartment cars. It has raised fastener areas that set on the pad
> and has totally been re-designed making sure it will not touch anywhere
> inside. The AC condenser area is larger for better air flow and to use a
> larger condenser and fan system. The spare tire cavity will be eliminated
> and the new design will be symmetrical side to side. The floor has two
> separate hidden compartments about 5'' thick---one for a tool kit (which
> will fit the factory tool pouch) and another for rags, polish, detail items
> and/or self preservations needs. (beer, pistola or a small P90 size PSD)
>  The floor is flat when the doors are down and everything under is out of
> site leaving enough storage for an overnight bag, folding chairs, small
> cooler, wife or friend stuff.
>
> I have wanted to do this for many years but now have a real need for
> several in-house car under construction. The first design will be made to
> fit 9000 serial number cars and up so if you have a late model hand-built
> wheelhouse car and would like a trunk that will not rub damage your engine
> compartment, please drop me a note. Sorry---not finished yet so I do not
> have the costs yet.
>
>  The first early production car version (1971 through vin 8999) should be
> available late Winter-early Spring.
>
> Thanks
>
> Kirk
>  _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>



-- 







Michael L. Shortt
Savannah, Georgia
www.michaelshortt.com
michael at michaelshortt.com
912-232-9390


This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be legally
privileged.  If you are not the intended recipient, you are hereby notified
that any retention, dissemination, distribution or copying of this
communication is strictly prohibited.  Please reply to the sender that you
have received this message in error, then delete it.  Thank you