[DeTomaso] Fitting Fiberglass Deck Lid

[GW]

The fiberglass deck lid did not fit well. It was quite a job to get the 
fitments. The following is the process for fittign the decklid which 
include a different latch and hood pins.

It is not complete as I still need to finish the Webber Carb opening and 
spray the primer with final sanding:

http://www.rc-tech.net/pantera1/decklid/dl.htm

http://www.rc-tech.net/pantera1/index.htm

http://www.rc-tech.net/

Gary