[DeTomaso] switch positions for Audiovox Cruise Control
Christopher Kimball
chrisvkimball at msn.com
Sun Aug 30 14:41:06 EDT 2009
Thank you! That really helps.
Now it's off to the garage to find out if I can do a simple fix with the existing cc and the new relay, or have to replace the whole thing with the new cc I bought.
Sincerely,
Chris
> From: cdifani at comcast.net
> To: chrisvkimball at msn.com; detomaso at realbig.com
> Subject: Re: [DeTomaso] switch positions for Audiovox Cruise Control
> Date: Sun, 30 Aug 2009 10:54:29 -0700
>
> Chris K:
>
> And just to add one more "old" email to the mix, here's the email that I
> kept on the switches.
>
> ___________________________________________
> Dear Chris, Jim and all others interested in CC (no Mad Dawg Content)
>
> I reset my dip switches as recommended as follows: 1-on, 2-on, 3-off, 4-off,
> 5-off, 6-off, 7-off
> and now my CC works as it should!! I had switches 2,4 and 7 set differently
> than the
> recommended settings. I'm not sure if the CC didn't work because of
> combination of those settings or because # 7 seven switch was set for coil
> not ECM. I have a coil but I'm running
> a Mallory Unilite dizzy. Whatever, it works now.
> I recommend the Audivox CCS-100 to anyone who wants to give their right leg
> a break. It's
> an easy installation.
>
> Jim Cain
> #5774
> ____________________________________________
>
> Chris
>
> Chris Difani
> '73 L #5829 "LITNNG"
> The Electric Pantera
> Sacramento, CA
> Email: cdifani at comcast.net
>
>
>
>
>
>
> ----- Original Message -----
> From: "Christopher Kimball" <chrisvkimball at msn.com>
> To: "Pantera List Serve" <detomaso at realbig.com>
> Sent: Sunday, August 30, 2009 7:44 AM
> Subject: [DeTomaso] switch positions for Audiovox Cruise Control
>
>
> >
> > Does anyone have the correct switch positions for the audiovox cruise
> > control module?
> >
> > Quite some time ago someone on the forum gave them to me and my unit
> > worked fine. I then added the L.E.D. light package and the cc stopped
> > working. I tried different switch positions, but it still didn't work, so
> > I just left it alone until now, when I ordered a new cruise control.
> >
> > Upon reading the instructions for the new cc, I found it said if a person
> > uses L.E.D. tail lights, a relay must be used for the cruise control to
> > work--the L.E.D.s don't ground the tail light circuit when the brake is
> > off, which is required for the cc to work.
> >
> > I don't know this for sure, but I'll be the same is true for my audiovox
> > unit. Before I pull it and install the new one, I want to try it with the
> > relay. That's why I need the correct switch positions, so I can be sure
> > everything is set up right when I test it.
> >
> > Much appreciated,
> >
> > Chris
> >
> >
> > _______________________________________________
> >
> > Detomaso Forum Managed by POCA
> >
> > Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> >
> > DeTomaso mailing list
> > DeTomaso at list.realbig.com
> > http://list.realbig.com/mailman/listinfo/detomaso
>
More information about the DeTomaso
mailing list