[DeTomaso] Flow Kooler water pump

[asajay at asajay.com]

I don't believe Summit does, I believe Flow Kooler does.

Asa Jay


Quoting Doug Braun <doug at silicondesigns.com>:

> If it's from Summit, why would they grind the ID number off?
>
> Doug
>
> -----Original Message-----
> From: detomaso-bounces at realbig.com
> [mailto:detomaso-bounces at realbig.com]On Behalf Of asajay at asajay.com
> Sent: Monday, August 24, 2009 12:25 PM
> To: detomaso at realbig.com
> Subject: Re: [DeTomaso] Flow Kooler water pump
>
>
> I got the water pump from Summit Racing, just search for the part
> number. It -is- a Flow Kooler.  I think it was about $80.
>
> http://www.summitracing.com/parts/BRA-1648/
>
> Sorry,  $89.  ;)
>
> Asa Jay
>
> Quoting Doug Braun <doug at silicondesigns.com>:
>
>> Asa Jay,
>>
>> 	Who did you get the pump from?  And how much was it?  Do you have any
> idea
>> if they modify the standard Flow-Kooler pump in any way other than just
>> grinding the numbers off?
>>
>> Doug Braun
>>
>> -----Original Message-----
>> From: detomaso-bounces at realbig.com
>> [mailto:detomaso-bounces at realbig.com]On Behalf Of Asa Jay Laughton
>> Sent: Friday, August 21, 2009 10:32 PM
>> To: deTomaso at realbig.com
>> Subject: [DeTomaso] Flow Kooler water pump
>>
>>
>> My new Flow Kooler water pump arrived earlier this week.  Tonight I took
>> some photos.
>>
> http://www.teampanteraracing.com/index.php?option=com_g2bridge&view=gallery&
>> Itemid=57&g2_itemId=3042
>>
>> - It has a backing plate already attached to the impeller.
>> - The bypass is -not- blocked and my photos provide interesting insight
>> into the recirculation system.
>> - I've illustrated two different gaskets that come with the pump, one of
>> which I don't believe would work very well.
>>
>> I'm excited about using this new pump.
>> Oh, and I got a new neck on my swirl tank, and with a new cap, I now get
>> a good 15 lb of holding pressure with no leaks.  Amazing.  The shop did
>> tell me the neck that was installed had no inner lip, it just tapered
>> down into the tank and they couldn't get a seal on it, even though they
>> -told- me they measured it (using a micrometer) and said it was the
>> proper depth.  Not sure I believe that, but they couldn't find the old
>> neck in the trash for me to compare it to.  Anyway, the new one holds.
>>
> http://www.teampanteraracing.com/index.php?option=com_g2bridge&view=gallery&
>> Itemid=57&g2_itemId=3089
>>
> http://www.teampanteraracing.com/index.php?option=com_g2bridge&view=gallery&
>> Itemid=57&g2_itemId=3092
>>
>> Tomorrow is another big wrench turner day.  I plan to work on the
>> Pantera all day long and get as much done as possible.  My goal would be
>> to drive it by Monday.
>>
>> Wish me luck or come on over if your local.  :)
>> Asa Jay
>>
>>
>>
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
>>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>