[DeTomaso] Flow Kooler water pump

Curt Hall cuvee at sbcglobal.net
Mon Aug 24 14:24:02 EDT 2009


About $90.00 bucks + tax. Summit

--- On Mon, 8/24/09, Doug Braun <doug at silicondesigns.com> wrote:


From: Doug Braun <doug at silicondesigns.com>
Subject: Re: [DeTomaso] Flow Kooler water pump
To: "Asa Jay Laughton" <asajay at asajay.com>, deTomaso at realbig.com
Date: Monday, August 24, 2009, 10:09 AM


Asa Jay,

    Who did you get the pump from?  And how much was it?  Do you have any idea
if they modify the standard Flow-Kooler pump in any way other than just
grinding the numbers off?

Doug Braun

-----Original Message-----
From: detomaso-bounces at realbig.com
[mailto:detomaso-bounces at realbig.com]On Behalf Of Asa Jay Laughton
Sent: Friday, August 21, 2009 10:32 PM
To: deTomaso at realbig.com
Subject: [DeTomaso] Flow Kooler water pump


My new Flow Kooler water pump arrived earlier this week.  Tonight I took
some photos.
http://www.teampanteraracing.com/index.php?option=com_g2bridge&view=gallery&
Itemid=57&g2_itemId=3042

- It has a backing plate already attached to the impeller.
- The bypass is -not- blocked and my photos provide interesting insight
into the recirculation system.
- I've illustrated two different gaskets that come with the pump, one of
which I don't believe would work very well.

I'm excited about using this new pump.
Oh, and I got a new neck on my swirl tank, and with a new cap, I now get
a good 15 lb of holding pressure with no leaks.  Amazing.  The shop did
tell me the neck that was installed had no inner lip, it just tapered
down into the tank and they couldn't get a seal on it, even though they
-told- me they measured it (using a micrometer) and said it was the
proper depth.  Not sure I believe that, but they couldn't find the old
neck in the trash for me to compare it to.  Anyway, the new one holds.
http://www.teampanteraracing.com/index.php?option=com_g2bridge&view=gallery&
Itemid=57&g2_itemId=3089
http://www.teampanteraracing.com/index.php?option=com_g2bridge&view=gallery&
Itemid=57&g2_itemId=3092

Tomorrow is another big wrench turner day.  I plan to work on the
Pantera all day long and get as much done as possible.  My goal would be
to drive it by Monday.

Wish me luck or come on over if your local.  :)
Asa Jay



_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at list.realbig.com
http://list.realbig.com/mailman/listinfo/detomaso



More information about the DeTomaso mailing list