[DeTomaso] ZF gear ratio

michael@michaelshortt.com michaelsavga at gmail.com
Thu Aug 20 23:57:38 EDT 2009


you would get the higher gear set 3.73 or even less and build an engine that
lives at high rpms and find a long piece of track,road.  Full roll cage and
safety equipment, concentrate on aero cause these suckers produce front end
lift like crazy, and make out a new will.

Michael Shortt




On Thu, Aug 20, 2009 at 11:47 PM, boyd casey <boyd411 at gmail.com> wrote:

> So If you built a higher horsepower engine would you need to change the
> gearing to get up to the 185 mph range  or just build an engine that along
> with more HP had a higher rpm range?
>
> Boyd
>
> On Thu, Aug 20, 2009 at 11:41 PM, boyd casey <boyd411 at gmail.com> wrote:
>
> > THANKS GUYS!
> > Boyd
> >
> >   On Thu, Aug 20, 2009 at 11:29 PM, <MikeLDrew at aol.com> wrote:
> >
> >>
> >> In a message dated 8/20/09 20 02 28, boyd411 at gmail.com writes:
> >>
> >>
> >> What is the standard gear ratio of the  ZF transaxle that came stock in
> a
> >> 73
> >> Pantera (as far as the equivalent of a differential) and is 5 th gear
> >> considered an "over drive"
> >>
> >>
> >> The rear end ratio is 4.22, and both 4th and 5th gears are overdrive.
> >>
> >> If you look at your gearbox, you'll see the ratios for each gear (and
> >> reverse) printed on the ID plate which is riveted to the shifter cover
> >> (where the shift linkage enters the box).
> >>
> >> Mike
> >
> >
> >
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>



-- 







Michael L. Shortt
Savannah, Georgia
www.michaelshortt.com
michael at michaelshortt.com
912-232-9390


This email is protected by the Electronic Communications Privacy
Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be legally
privileged.  If you are not the intended recipient, you are hereby notified
that any retention, dissemination, distribution or copying of this
communication is strictly prohibited.  Please reply to the sender that you
have received this message in error, then delete it.  Thank you



More information about the DeTomaso mailing list