[DeTomaso] electrical help
MikeLDrew at aol.com
MikeLDrew at aol.com
Wed Aug 12 01:03:21 EDT 2009
In a message dated 8/11/09 21 43 48, forestg at att.net writes:
>
>
> Not to oversimplify things but based on your description of operation all
> you need to do is reverse the two connections going to the lift motor. All
> the relay does is reverse the polarity to the motor.
>
I forgot to mention that when Relay Rick Moseley was working on my car's
electrical system, he found that the wiring at my headlight relay failed to
match that of the factory wiring diagram. At the time neither of us knew
about the modification to the system used in 1974 cars. He found the same
'error' in his own car, which was also a 1974 (mine is a '72 with a '74
harness/relay panel installed). On both cars, he switched the wiring around at
the relay to match the '73 wiring diagram (thus changing it from the factory
system for the '74 cars) and then swapped the connections at the motor so
that it worked properly.
I suppose if I was really anal, knowing what I now know, I'd go under the
dash and change it all back.
Nah....:>)
Mike
More information about the DeTomaso
mailing list