[DeTomaso] Clutch and 180's
Will Demelo
wdemelo at cogeco.ca
Tue Aug 11 16:40:14 EDT 2009
You can replace the clutch and press plate as Jack suggested.
Will
----- Original Message -----
From: JDeRyke at aol.com
To: wdemelo at cogeco.ca ; detomaso at realbig.com
Sent: Monday, August 10, 2009 2:33 PM
Subject: Re: [DeTomaso] Clutch and 180's
In a message dated 8/9/09 6:25:43 PM, wdemelo at cogeco.ca writes:
Can the clutch be replaced without removing the Byers Bros' 180's?
Will, the last time I did a quick-clutch replacement in a Pantera, I unbolted the bellhousing and slid the ZF back enough to clear the clutch disc, then moved the ZF's front a bit sideways- enough to access the flywheel, without actually removing the ZF. If you can reach all the bellhousing bolts, this method should work. But I've not tried it on a 180-equipped Pantera. Let us know if it works- J Deryke
More information about the DeTomaso
mailing list