[DeTomaso] Edlebrock carbs and Dog Bone cleaners
JDeRyke at aol.com
JDeRyke at aol.com
Wed Aug 5 14:46:40 EDT 2009
In a message dated 8/5/09 10:43:36 AM, claywillmott at hotmail.com writes:
> Does the dog bone fit on Edelbrocks with Elec Choke without a spacer?
> The pics look like the gas in line and electric choke are higher up than
> holley on their carbs adn floats are side to side not front to back.
>
Not sure on the uncommon Edelbrock/AFB, but since there's at least 4
different versions of the so-called 'dogbone' air cleaner, and at least one does
need a spacer so you can calculate the odds here, regardless of your choke
clearance, etc. Figure that you'll need at least 2" ABOVE the carb body to
allow air to make the turn smoothly into the carb throats. And most speed shops
will allow returns if you pay shipping both ways and don't scratch the
part, (but verify this first). Good luck- J Deryke
More information about the DeTomaso
mailing list