[DeTomaso] MANGUSTA BRIDGE BUSHINGS / Dick Ruzzin

[JDeRyke at aol.com]

In a message dated 4/30/09 6:27:25 AM, dickruzzindesign at aol.com writes:

> The bushing is small ( about 1 inch in diameter), a steel sleeve filled 
> with dense rubber with a metal tube insert that the pass through shouldered 
> bolt goes through when it is mounted.
> 
They sound like regular production a-arm bushings. By taking one to a NAPA 
store, they probably can match up something. Otherwise, try the aftermarket 
urethane bushings sold by Speedway Motors in NE and others. Good luck- J 
Deryke


**************
Access 350+ FREE radio stations anytime from anywhere on 
the web. Get the Radio Toolbar! 
(http://toolbar.aol.com/aolradio/download.html?ncid=emlcntusdown00000003)