[DeTomaso] Brake Switch Frustration

[Thomas Tornblom]

Charles McCall skrev:
> 	Dear John,
> 
> While acknowledging that I know absolutely nothing about the stock brake
> switch, are you sure the problem is the switch? 5 failures, all in the same
> car or from both? I'd respectfully suggest that it's an installation problem
> rather than a problem with the switch itself. Could the geometry be off on
> your particular car which means stressing part of the switch until it
> breaks? Do you have an usually heavy brake foot? ;-)

It is an hydraulic switch that is mounted in the distribution block 
beneath the master cylinder. No geometry issues possible without gross 
incompetence during install :-)

I have also not heard that this part should be a problem, although mine 
does take a bit of break effort to close.

Are these switches OEM or some aftermarket switch of questionable quality?

Didn't switches from the old beetle fit?

> 
> I've had no problems with the switch on 2 different Panteras and many years
> of ownership (and other problems) and it doesn't ring a bell as being a
> candidate for the "top 10 Pantera flaws" list, or something that has come up
> on the list often. 
> 
> The fact that you are pioneering a solution 35 years after the introduction
> of the model suggests that it isn't a problem that affects a lot of cars or
> that the problem isn't in the switch per se. 
> 
> Just food for thought...
> 
> Charles McCall
> 1985 DeTomaso Pantera GT5-S #9375
> "Raising Pantera Awareness Across Europe"
> http://www.poca.com/index.php/gallery/?g2_itemId=2323
> -----Mensaje original-----
> De: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com] En
> nombre de John Taphorn
> Enviado el: miércoles, 22 de abril de 2009 15:39
> Para: detomaso at realbig.com
> Asunto: [DeTomaso] Brake Switch Frustration
> 
> I am giving up on the stock Pantera brake switch.  I've got five of them in
> a drawer that I have accumulated during my years of Pantera ownership.  I
> had another fail recently.
> 
> I've tried to stay true to the original brake light design and dutifully
> have called a Pantera vendor to replace each one that failed.  However, I am
> throwing in the towel and going to an alternative that would be more
> reliable.
> 
> I have disassembled the switch units to try and find a consistent failure
> point, but I have been unsuccessful determining a single culprit.  As one
> may know, this is a part in which the inspection process is one way. After
> you cut it open, there is no reassembly.  That is a shame, I could probably
> make a few that would work from my inventory.
> 
> I imagine others must have taken this journey before me and switched to a
> non-fluid pressure mechanical method.  I would appreciate your lessons
> learned.
> 
> It appears to me that a practical approach would be to mount a switch
> through the chassis panel that on my car is in the footwell about an inch
> above the brake pedal arm.  It seems possible to mount a switch in that
> location that would be depressed when the pedal is at rest and be released
> as the pedal is actuated.  Thus, it would offer no continuity when depressed
> and continuity when released.
> 
> Is anyone using this set-up?  Also, if so, do you have a switch part number?
> It would certainly save me time going through the NAPA parts catalogs.
> 
> Of course, I am open to other approaches as well.
> 
> Thanks
> JT
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> 
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> 
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
> 
> _______________________________________________
> 
> Detomaso Forum Managed by POCA
> 
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
> 
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
> 
> !DSPAM:49ef2bcd27446153625052!
> 


-- 
Real life:   Thomas Törnblom             Email:  Thomas.Tornblom at Hax.SE
Snail mail:  Banvallsvägen 14            Phone:    +46 18 444 33 21
              S - 754 40 Uppsala, Sweden  Cellular: +46 70 261 1372