[DeTomaso] erratic water temp gauge
JDeRyke at aol.com
JDeRyke at aol.com
Thu Apr 16 14:08:48 EDT 2009
Tom, I've had this condition from a loose connection to the sender post.
And once when I tried tightening up the connection a little more without a
second nut under the wire lug, the internals of the sender apparently
separated, giving the same darn symptoms with a very tight connection. So I suggest
adding a second 10-32 nut so the wire lug is squeezed between the nuts and
not too much torque on the sender guts. Quite possibly a loose connection on
the gauge -either the lead from the sender or the ground-would do the same
thing. Good luck- J Deryke
**************
Access 350+ FREE radio stations
anytime from anywhere on the web. Get the Radio Toolbar!
(http://toolbar.aol.com/aolradio/download.html?ncid=emlcntusdown00000003)
More information about the DeTomaso
mailing list