[DeTomaso] Aluminum Cleveland Block
LS
lashdeep at yahoo.com
Wed Sep 24 15:30:22 EDT 2008
Indeed, they were used in the SI if I remember correctly.
The C is such a big part of the history of the early cars, it seems sorta weird to not include it in a build.
But, the Goose had a W before it, so I guess if I had one laying around it wouldn't be terrible.
----- Original Message ----
From: John Zeedick <Pantera351C at Hotmail.Com>
To: LS <lashdeep at yahoo.com>; cengles at cox.net
Cc: detomaso at realbig.com
Sent: Wednesday, September 24, 2008 3:20:15 PM
Subject: Re: [DeTomaso] Aluminum Cleveland Block
All:
I think Windsors were used in later Panteras when they stopped selling them
in the USA
John Z
On 9/24/08 12:56 PM, "LS" <lashdeep at yahoo.com> wrote:
> Bill, Chuck, thanks for the replies and updates.
>
> I can't believe nobody in AUS has put one together yet...
>
> Is installing a Windsor in an early Pantera blasphemous??
>
> Thanks,
> LS
>
>
>
> ----- Original Message ----
> From: "cengles at cox.net" <cengles at cox.net>
> To: LS <lashdeep at yahoo.com>
> Cc: detomaso at realbig.com
> Sent: Wednesday, September 24, 2008 12:38:20 PM
> Subject: Re: [DeTomaso] Aluminum Cleveland Block
>
>
> Dear LS,
> The short answer is that no one is reliably producing aluminum 351 C blocks
> and there are none, reliable or not, readily available.
> The long answer is that there were a very few aluminum blocks cast by Ford for
> racing purposes. You won't find any of these . Todd Buttermore has experience
> with engine casting and production. He has embarked on a project to create a
> new, improved 351C with corrections and improvements on the old design. He has
> cast up a few blocks. He is not reliably producing them, but he intends to
> provide them in aluminum and iron. To my knowledge, this block has not yet
> been assembled into a working engine nor tested in the real world. It seems
> very promising, but it certainly will be a while before it is available.
> Warmest regards, Chuck Engles
>
> ---- LS <lashdeep at yahoo.com> wrote:
>> Is anyone reliably producing Al 351C blocks today?
>>
>> I have seen talk about tooling up some from different manufacturers, but
>> can't find any readily available sources.
>>
>> Thanks,
>> LS
>>
>>
>>
>> _______________________________________________
>>
>> Detomaso Forum Managed by POCA
>>
>> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>>
>> DeTomaso mailing list
>> DeTomaso at list.realbig.com
>> http://list.realbig.com/mailman/listinfo/detomaso
>
>
>
>
> _______________________________________________
>
> Detomaso Forum Managed by POCA
>
> Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
> DeTomaso mailing list
> DeTomaso at list.realbig.com
> http://list.realbig.com/mailman/listinfo/detomaso
>
More information about the DeTomaso
mailing list