[DeTomaso] Aluminum Cleveland Block

[cengles at cox.net]

Dear LS,

The short answer is that no one is reliably producing aluminum 351 C blocks and there are none, reliable or not, readily available.

The long answer is that there were a very few aluminum blocks cast by Ford for racing purposes. You won't find any of these . Todd Buttermore has experience with engine casting and production. He has embarked on a project to create a new, improved 351C with corrections and improvements on the old design. He has cast up a few blocks. He is not reliably producing them, but he intends to provide them in aluminum and iron. To my knowledge, this block has not yet been assembled into a working engine nor tested in the real world. It seems very promising, but it certainly will be a while before it is available.

Warmest regards, Chuck Engles



---- LS <lashdeep at yahoo.com> wrote:
>Is anyone reliably producing Al 351C blocks today?
>
>I have seen talk about tooling up some from different manufacturers, but can't find any readily available sources.
>
>Thanks,
>LS
>
>
>
>_______________________________________________
>
>Detomaso Forum Managed by POCA
>
>Archive Search Engine Now Available at http://www.realbig.com/detomaso/
>
>DeTomaso mailing list
>DeTomaso at list.realbig.com
>http://list.realbig.com/mailman/listinfo/detomaso