[DeTomaso] Shameless Plug for new Turn Signal Switch on ebay
SOBill at aol.com
SOBill at aol.com
Sun Oct 5 13:05:25 EDT 2008
Mike,
I have a flat charge of $50 to repair the turn signals. This includes fixes
to strengthen the switch week points.
Here's the painless way to remove the switch:
To remove the switch, you must drop the steering column.
Remove one of the steering column two rear clamp bolts completely. Go to a
hardware store and get two 8 x 1.25 mm x 40 mm (about 1 ½ inch) bolts. Longer
is better. Screw one of the new long bolts into the hole where you removed
the first regular bolt. Remove the second rear bolt. Screw the second long bolt
into the second hole. Remove the remaining two front bolts (mine are Allen
head) and drop the column down. The long bolts will support the column, but
more important, they will align the column clamp holes when you put the whole
thing back in place with only two hands and limited tolerance for frustration.
Remove the screws holding the switch cover in place. Remove the screws
holding the switch clamp in place. Unplug the switch harness. Put the various
bolts, screws, and the cover in a baggie.
When you replace the turn switch, it would be a good time to replace the OEM
plastic ignition switch terminal strip. For an addition $5, I will send you
a high quality nylon terminal strip.
Have fun,
SOBill Taylor
sobill at aol.com
In a message dated 10/5/2008 9:34:34 A.M. Pacific Daylight Time,
mbefthomas at comcast.net writes:
SOBill, just for reference, what is your repair charge, or does it depend on
the extent of the repair needed?
Mike Thomas
**************New MapQuest Local shows what's happening at your destination.
Dining, Movies, Events, News & more. Try it out!
(http://local.mapquest.com/?ncid=emlcntnew00000001)
More information about the DeTomaso
mailing list